Application of Flow Control Valves

1.Tapping and Drilling Power Heads

Tapping and Drilling Power Heads

Tapping and drilling power head: It is used to regulate the feed speed of the tool on the tapping equipment, the travel lever is matched with the dial on the speed Control Valve, when the travel lever touches the dial on the speed control valve, the speed control valve will start to regulate the speed, then the feed speed will decrease, and the feed speed will be regulated by the knob on the speed control valve. When the dial wheel of the speed control valve is pushed to 90 degrees by the travel lever, it starts to back off the knife at full speed, at this time the speed control valve does not work.

2.Hydraulic Pipe Cutting Machine

Hydraulic pipe cutter: used to regulate the rate of the saw blade of the pipe cutter to enter and exit the knife, knob control, infinitely variable speed, speed regulation is accurate, no leakage. One-way valve structure prevents oil backflow. Manual control, simple and convenient.

3.Hydraulic Drilling Machine

Hydraulic Drilling Machine

Hydraulic drilling machine: When the hydraulic drilling machine needs to adjust the machining speed, it needs to use the speed control valve to adjust the machining speed. When the stroke lever reaches the maximum stroke, it will feed back the signal to the electric switch, and then the hydraulic drilling machine will back off the tool at full speed.